Brother Bulky KH260 Tuck Brush Assembly Set. Sold in set of 2 Tuck Brush Assemblies (1 Right & 1 Left. These are NEW PARTS not salvaged parts. Consists of (1) R and (1) L bracket per assembly and includes:  brackets, brushes, screws and large thumb screws assembled and ready to attach to your knitting machine sinker plate.   Please call us at our telephone hot line - 866-463-8810 - if you have any problem entering your order or need help selecting the items you need.  ..

Brother Cast On Comb. Brand New Brother/KnitKing original style, wire hook Cast-On combs, just like the ones Brother/KnitKing made for so many years. These are a MUST HAVE for nearly all types of knitting Machines. They as sold as a complete set of three pieces: a Long cast-on comb (29-1/2"), a short cast on comb (11"), and a cast on comb connector link to link them together. They work on nearly any metal bed knitting machine. When connected, they are long enough to use on your standard length bed  knitting machine. Total over-all length when connected is 40-1/2 inches. These are.....

Brother KH260 Bulky Knitting Machine Motif Cams. Used when doing single Motif Fairisle knitting with your knitting machine punch cards to isolate the needles on your machine bed. Sometimes called isolation cams, these are a must for anyone doing punch card knitting on the Brother/KnitKing KH-260 Bulky knitting machine.  Sold as set of (1) RH & (1) LH cam...

Brother KR-260 Bulky Ribber Setting Plates. Setting Plates are used to attach your knitting machine ribber bed to the main bed of your knitting machine. Brother KH-260 Ribber Setting Plates are original Brother/KnitKing knitting machine parts and are sold as an assembly and are sold in pairs  of (1)L & (1)R,complete with screws and associated parts (see picture above). these Brother knitting machine parts also fit KnitKing machines and ribbers.  ..

Brother Setting Plates 4.5mm (Ribber Attachment Plates). Brother Setting Plates are required to attach your knitting machine ribber bed to the main bed of your knitting machine. These Setting Plates are original Brother/KnitKing knitting machine parts and are sold as an assembly, complete with screws and associated parts. Sold in pairs - 1L & 1R, these Brother knitting machine parts also fit KnitKing machines/ribbers and work on most Brother 4.5mm machines. (this size will not work on Bulky machines)...

Do Jiggy Screwdriver. This multi-tip screwdriver has eight tips (hidden under the flip top) and a flashlight. Great for working on your sewing machine, knitting machine or serger and the light is an added bonus. Assorted random colors - black, red and blue...

Drop Stitch Latch Tool. Have you ever dropped a stitch while knitting on your knitting machine and tried to relatch the dropped stitches? If you have then I know you will appreciate this little fix it tool. You have probably found out to your chagrin that if you relatch the dropped stitch from the side facing you on the machine that the repair will not be right,,,,, for when you  turn the garment around to the front side where you can see it, you will see you have a purl stitch where a knit stitch ought to be!!!!!. What a bummer that is......! With this tool you.....

Extra Long Tweezers - 6". Extra long handle and tight grip plus bent tips make it the perfect tool for inserting needles and threading of all serger/overlock machines. Great for many craft projects...

EZ Bob Plastic Bobbins. EZ Bobs bobbins are made of a soft plastic shell with a firmer plastic back. To use the bobbins, you peel back the soft shell. You can now wind yarn on until you have filled the bobbin. When done, push the soft shell on the EZ Bob down again remembering to hold the end of the yarn outside the shell. EZ Bobs are constructed so they hold onto the yarn, but only enough to keep it from slipping out. As you pull the EZ Bob down from your knitting, more yarn is released. You can keep tails short.....

Kinky Cord for Studio Electronic Knitting Machine.  These are very hard to find cords for your Studio electronic knitting machine. They allow patterning signals between your knitting machine Electronic Patterning and your knitting carriage. Ships via USPS Priority Mail in US; Air Parcel Post to other countries. Please allow 4-7 days for shipment...

Knitting Machine Card Punch - Punches holes in blank pattern punch cards for uniform size. Specifically made for punching holes in pattern cards for your knitting machine card reader. Uniform size means fewer jams and better looking results for your knitted project. Sold individually. Works on all standard 12, 18 & 24 sts punch card (standard and bulky) machines. May differ slightly from picture because of need to multi source this item.   Please allow 3-5 business days for arrival...

Knitting Machine Cleaning Brush aka Channel Brush is a must have to clean out lint, dust and yarn build up in the sponge bar or needle retainer bar slot and (very carefully) the knitting machine carriage.  Overall length is 44" with 5/8" diameter corkscrew bristle fiber brush.  Can be used on nearly any metal bed knitting machine.   Please allow 4-7 days for arrival.   This item cannot be shipped outside the USA due to postal size restrictions on export shipments...